home
Below is a sample of Unisoft customers. Unisoft clients range from start-ups to billion dollar companies.
ABB Inc., Action Instruments, ACT Manufacturing, Acromag Incorporated, Acustar, ADL Technology, Advanced Electronics, Advanced Electronic Services Inc. (AES), A & F Fixturing Products, Agilent - USA, Agilent - Europe, Airshield Vickers, Airsys Inc., Allied Signal, Alpha Circuits Inc., Altea Therapeutics, American Power Conversion (APC), Amtech Electrocircuit Inc., AMI, Analogic - Life Care Systems Division, Analogic - AAG Detector Manufacturing, Ansen Corp, Apex Micro - Canada, APC-MGE, APC - American Power Conversion Corp. - Philippines, Apex Test Technologies - Bangalore, India, APPS, Aqua Electronics Inc., Art Solutions - Italy, Assembly Line Inc, ASD, ASMD, Aspen Test Engineering, AssemblyOne, AT&T, ATE Development, ATE Fixturing & Design Inc. - Canada, Atlantic Design, Ansen Corp., Avex Electronics, Avidyne Communication/Navigation/FMS Group Corp., Aviva Communications, Ayrshire Electronics Kentucky, Ayrshire Electronics Minnesota, Barber Coleman, Basler Electric, Baxter Health Care, Bel Power Inc., Benchmark Electronics (BEI) - USA, Benchmark Electronics Cork (BEI) - Ireland, BEI Wisconsin - Better Electronics Immediately, BEI Electronics Ireland Limited - Europe, Best Inc., BF Goodrich Sensors and Integrated Systems Div., BF Goodrich Aerospace, Bluff Country Manufacturing Inc., BMI Inc., Boeing, Brazentek, Bristol Inc. (a Division of Emerson Process Management), Bristol Babcock, BSU Inc., CAE - Canada, C-Tech Ltd. - Canada, Calcomp-Lockeed, Caltronics Assembly Inc., Canadian Aviation Electonics LTD. - Canada, Casas International Inc. - Mexico, CB-RAM Electronics Inc., CB Technology Ltd Scotland - United Kingdom, CDC Technologies Inc., CD&M Electronics, CDR Manufacturing Inc., Celestica, Cerberus Pyrotronics, Check Technology Corporation (CTC) - Canada, Chiaro Networks, Chip Component Electronx - CC Electronx, Circuit Design Specialties, Inc., Cisco Systems, Cincinnati Milacron , Colorado vNet, Communications Test Design, Inc. (CTDI), Compas - Canada, Comptronix, Computer Assembly Systems LTD - Canada, Compu-Video Systems Inc., Comtek Computer System Inc., Crystal Filling Inc., Cubic Defense Applications Inc., Cutera Inc., Data Instrument-Honeywell, Delco Electronics, Delco Electronics - Mexico, Delnosa Electronics, Delnosa Electronics - Mexico, Delphax Systems - Canada, Delphi, Delta Group Inc., Delta Group NM, Detection Systems, Develco, Digalog Systems Inc - USA, Digalog Systems Inc - Europe, Digital Equipment of Canada, Digital Equipment USA, Dimation Inc., DNE Technologies, Dovatron Manufacturing, Dover Elevator Systems, Dovertron International, DPS, Draeger Medical Inc. - USA , Draeger Medical B. V. - Netherlands, DRS Data & Imaging Systems Inc., DRS Technologies - Canada, DSHS, Electronic Data Systems (EDS), Edge Circuit, E&G Technical Partners, Elgin Electronics, Eltek Valere, EMA (Electro-Mechanical Assembly) Services Inc., EMD Associates, Emerson Process Management, EMS Technology, EMTI-Electronic Manufacturing Technology Inc., Encore Computer, Enigma Interconnect Inc - Canada, Ericsson, EST - Electronic Surface Technologies, Inc., Eudosia Energy Systems - Europe, European Circuits Ltd. Scotland - United Kingdom, Exceltech, Executone, Extreme Engineering Ltd. - Canada, Extreme Networks Inc., Fireye - United Technologies, Flextron Circuit Assembly, Flextronics, Flextronics International USA Inc. / Mexico, General Electric (GE), GE Computer Dynamics, GE Aviation Digital Systems - Smiths Aerospace Inc., General Scanning, Global Connection Company, Goodrich Sensors and Integrated Systems Div., Governors America Corp., GreekClothing.com LLC, Griffin Limited Inc., Group Technologies, Grundig, GTE, GTI, Guardian Manufacturing Inc, Harrington Signal Inc., Harvard Custom Manufacturing, Hasler Timeplex, Helios Coatings Inc., Hewlett-Packard - USA, Hewlett-Packard - Europe, Hibbing, Hill-Rom, Hi-Tek Electronics, Inc., Hi-Tech Manufacturing, HL Electronics, Hologic/Lorad, Honeywell, Hughes Aircraft, Hughes Network Systems, I2 Technology, IBM, IDERS Inc. - Canada, IEC Electronics, Industrial Indexing Systems, Innovative Circuits, Input/Output, Intel, International Marketing Corporation - India, IPC Info System, Innovative Manufacturing Source Inc. (IMS) - Canada, Inrange Technologies, Insight Technology Solutions GmbH - Germany, Inventec - Asia, Itronix Corp., Jabil Circuit USA, Jabil Circuit Guangzhou China, JAE, Japan Aviation Electronics Limited - Asia, JDS Uniphase, JRE Inc., Jurong Hi Teh (Suzhou) Co. Ltd - China, K J Marketing Services - Canada, KDS Controls Inc. / GHSP, Keteca USA Inc., KBS, Keithly Metrabyte, Kepco Power Inc., Key-Tech Scotland - Europe, Kestronics (S) Pte Ltd - Singapore, Kimchuk Inc., Kinetix Manufacturing Services (KMS), Kronos Inc., L3 Communications, Laritech ODM Solutions Inc., Lau Technology - Asia, Lecroy Corporation, Liebert, Litton, Lockheed Martin, Loral, Lucent Technologies, Lutron Inc. - Mexico, Lutron Inc - Puerto Rico, Lutron Inc. - USA, Makk Corporation - Canada, Maks Inc, Marquette Electronics, Mediaquest, Microart Services Inc. - Canada, Microbonds Inc. - Canada, Micro Interconnexion Pvt. Ltd. - India, Micro Engineering Inc., Microsystems, Microwave Power Devices, Mid-South Electronics Products Engineering/MSI, Millennium Electronics Inc. (MEI), Millipore Waters, Mine Safety Appliances, MC Assembly, Mirtec, Miteq Inc.- Microwave Information Transmission Equipment, Mitsubishi, MLA, MobileRobots Inc., Motorola Inc. - USA, Motorola Inc. - France, Microboard Processing - MPI, Multi Amp, Multi Tech System, NASA Kennedy Space Center, Natel Engineering Inc., National Circuit Assembly (NCA), National Instruments, Navatek Resources Inc., NCR, Neeltran Corp., New Venture Technology, Nexus Electronics, Northrop Grumman, Northwest Circuits Corporation, Nuvisions Manufacturing LLC - Mexico, Oeco LLC, OEM Worldwide, OMNEX Control Systems ULC - Canada, Oncore Manufacturing Services, OSDA Inc., Paramax, Peak Contract Manufacturing Inc., Pentek Inc., Pergamon Corporation, Perkins Electronics, Phoenix Company of Chicago, Inc., Phoenix Design, Philips, Pioneer, Plexus Inc. CA, Plexus Inc. MA, Pole Zero Inc., Premier EMS, Printronics A G - Singapore, Projects Unlimited Inc., Proteon, Proto-Pac Engineering, ProWorks Inc., Q-Electronics Inc., Quality Electronics Inc., Qualtech Backplane Inc., QualTech Technologies Inc., Raven Industries Inc., Raynet, Raytheon Integrated Defense Systems, Raytheon Space and Airborne Systems, Raytheon Marine, Raytheon Submarine, Raytheon Systems, R. C. Tronics Inc., React, Relm Communications, Remec, Restor Industries, Restor Telecom Inc, Rexon/Wangtek, Ritex - Asia, Ritex - Taiwan, RF Technologies, R-K Electronics Inc, RNB Enterprises, Robins Air Force Base, Rockwell, ROGER sp.j. - Poland, Royonic GmbH / Mydata - Germany, Safran Group Europe, Sagem Communication SA - France, SAIC - Science Application international Corp., Sanmina-SCI Systems Singapore Pte Ltd - Singapore, Saunders Electronics, Scantom Inc., SCI, Schindler Elevator Corporation, Schlumberger, Schneider Electric Corp. - Philippines, SealTec Manufacturing Inc., Sencuricor Telesciences, Sensormatic Electronic - Puerto Rico, Sigmatronix, Simmons Precision, Siemens Medical Labs, SMTC - Canada, SmarTire Systems Inc. - Canada, Smiths Aerospace / GE Aviation, Snecma - Europe, Space Systems Loral, Spem Corporation, Spinnaker Contract manufacturing, Solectron, Solectron Netherlands BV - Amsterdam, Sortex LTD. - United Kingdom, Space and Naval Warfare Systems Command, Spacelabs Medical, Spawar System Center - US Navy, Spec-Tronics , Stentech, Surface Mount Technologies / SMT Engineering, LLC, Surface Mount Technology Nw, Inc., Symbol Technologies - Mexico, Symmetricom Boulder, Systronix Inc., Tadiran Communication - Israel, Tanon, TDM International, Teams, TEchfabrik Inc, Tecnosistemi S.P.A - Italy, Telephonics, TelStrat, Teradyne, Test Program Generation, Testnet, Testronics - USA, Testronics - Mexico, Texas Instrument, Texas Microsystems, The Bernd Group Inc., The CableShoppe Inc., The Gores Group - Europe, The Test Connection, ThermoFisher Scientific, Third Rail Engineering, Timing Solutions Corp., Toyota Motors, TPG Corporation, Trans Lux Inc., Truck Tech Corporation - Canada, TRW, TTI Testron, Turnkey Test, Tyco, UniComm Signal Inc. - Canada, Unisys, United Technologies, Universal Lighting Technologies, US Navy, Valere Power, VANSCO Electronics LP - Canada, Varian, Verdant Pty Ltd - Australia, Veritek Manufacturing Services, LLC, Vitron Manufacturing USA China Vietnam, VR Industries, Wayne Kerr - USA, Wayne Kerr - United Kingdom, Wellex Corporation, Westinghouse, WinTech Electronics, WMS Gaming, Xerox Corporation, XL Manufacturing Inc, YESTech, Zhone Technologies Inc., Zynx, ZRL
- Literature: Click here for more literature.
Bristol Babcock has been serving the Oil, Natural Gas, Waste and Fresh water industries with process control instruments for over 100 years.
Bristol installed two Mydata pick and place lines. Our goals were many; we needed a software package that would allow us to do all of our programming of production and prototype boards and process documentation off line quickly no matter how difficult the board.
We wanted a software package that was easy to understand, yet was powerful enough to do what we needed. Most of all we wanted a supplier that was going to be there when we needed them. The UniSOFT
FACTORY software was the answer.
Five years and hundreds of programs later the Unisoft FACTORY software is a proven product. On the average it takes twenty minutes or less to program (double sided SMT) our boards. Process documentation is also critical to us;
Unisoft FACTORY software had all the answers. Just as Bristol has been committed to its customers; UniSOFT has been committed to us. What a partnership; what a software package.
Michael Charette
Surface Mount Process Engineer / Digital Products Supervisor
-----------------------
"UniSOFT Corporation has been chosen as the primary supplier of the software required to drive this system. Although Manufacturing Engineering has evaluated other suppliers, the
UniSOFT "off the shelf" CIM software package seems to fit right into the manufacturing system at plant 2. The price negotiated with
UniSOFT includes custom tailoring of the WIP tracking software for our specific needs. Other software packages investigated including; Genrad's Tracs III, Unicam, Eyring
AMS, C-Link and others on the market are lacking major features which would be
costly or in most cases impossible to add."
Customer justification summary -
Plant wide installation
-----------------------
Unisoft has a client who is a large company located in the United States that
has been using the CELLS Product & Job Tracking MES Software
for over five years to track their product lines throughout the production
process. A subsidiary of their's located in Canada is selecting
a MES tracking software system for their facility and representatives from their
plant visited the United States parent company in November of 2005 to look at
the Unisoft CELLS system installed their.
Below is a summary of that visit. We are proud of their selection of the Unisoft
CELLS Product & Job Tracking MES software. If you wish further details on the company
please contact Unisoft directly.
CLIENT COMMENTS "Unisoft is presently the choice application for adding an FDA
compliant electronic data collection and WIP tracking system here at this
facility in Canada. I had the VP of operations and head of the IT department
visit our parent company in the United States to get an extended presentation
from the Unisoft CELLS Administrator their. The presentation went very well and
they both agreed Unisoft would be the best fit. Manufacturing and IT have
started to look at how they will structure routings and what they will need for
related equipment such as bar code scanners and PC's."
------------------------
"Several years ago we purchased
ProntoTEST-FIXTURE software for our Genrad ATE. Later we ordered
ProntoTEST-FIXTURE for our
Hewlett Packard test equipment with good results. Now we have
ProntoPLACE for our two MYDATA SMT component placement machines and use
ProntoVIEW-MARKUP for providing paper or paperless process documentation for our assembly and
repair operations. We are extremely happy with the way the Unisoft FACTORY suite has
worked for us."
Tony Marino - Plant Manager, Bristol
Babcock
-----------------------
"Our UniSOFT configuration has
been instrumental in reducing engineering development costs. Maintaining an
aggressive product development schedule would be impossible without the UniSOFT
tools."
Mike Bartnick - Delco Electronics
-----------------------
We are extremely happy with
ProntoVIEW-MARKUP paperless process documentation and repair software. We have also
purchased ProntoPLACE for our Universal assembly equipment.
A. Manual. - Keithly Instruments
-----------------------
Evaluation comments:
We just completed a board build using the file you converted for me. We
actually used the software "live" (versus making hard-copy drawings) since the
board had so many item numbers and it worked great. I would go so far as to say
it would have been almost impossible without it.
So far this is awesome. Thanks for the quick turnaround... I'm sure I'll spend
the day going through the tutorial and instructions. But I'm already
impressed. It would have taken me untold hours to get to the point where I had
something usable using manual techniques.
Using our "live" board makes a great demo!
Gary Lynch - Best Electronics
Inc.
-----------------------
We appreciate everything your
company has done for us, you have definitely made us more competitive.
Jay Patel
----------------------
Thanks you for your time and
working with me. The software is very valuable. Its been great.
Mike Knox - HP, California
----------------------
Your software is AWESOME! I couldn’t live without it.
Randel Stewart, President, Circuit Design Specialties, Inc.
-----------------------
Excellent
software and response time. I'm telling everyone about
Unisoft. What a neat set of
products! Thank you.
Jim W. - ATW
-----------------------
After renting your
software Pronto PLACE for 1 month, I find that it is very acceptable in performance... We
are therefore applying 100% of the first months rental credit towards
purchase. We are in process to purchase the package and you will receive
purchase order in next few days.
Y.S.K.
- Jurong Hi Teh (Suzhou) Co. Ltd - China
-----------------------
I thought you might like to hear what we saw in UniSoft CELLS Product & Job
Tracking MES that we
liked......Your basic product architecture is simple and straightforward. This
allowed Unisoft to be one of the most economical choices we had in terms of
product cost. This also equated to a shorter implementation time and cost.
Customer
evaluation summary - Plant wide installation
-----------------------
I have presented the software to a number of my techs. They really like it.
One of the primary reasons I wanted to try your software was the versatility
of using either Pads or Mentor files. The ease of use has been so great
that even our engineers have expressed an interest.
DB - General Electric
-----------------------
Thank you for your fast response.
The UniSOFT software installation & setup was simple. The software is
working fine and is simple to operate... I think that it is a very good tool
for your engineers and the debug team. I will forward this software to all
relevant people in our factory .
Moshe Golan - Elbit Systems,
Israel
-----------------------
Thousand of thanks!
ProntoVIEW-MARKUP working like crazy. I can not
believe I now have this powerful tool . You are great.
Cristian
Lungu - Solectron
-----------------------
Just for your information, I've
sent your coordinates and a sample file to one fellow worker in MCMS Penang
(Malaysia) in order for him to evaluate especially that amazing feature of
ProntoVIEW-MARKUP that consists in re-creating the schematics from the nodes.
Yves de
Ryckel - Managing Director MCMS, Belgium
-----------------------
Thanks for the help, this tool
has definitely made a difference for us.
DT - TKT
Corp.
-----------------------
We are beginning to see the
benefits of using the software and it has been a great aid to our inspection
people.
Willie Anderson
- Keytech systems, Scotland
-----------------------
A remarkable value!
Andrew Giannettino - BH
Technical
-----------------------
We have used you excellent shareware software
ProntoVIEW-MARKUP at our test station in our production. I wonder how much the full
version of the program costs?
Ulf Kjellberg
Ericsson Microwave Systems AB - Europe
-----------------------
By the way... I've been using the tool for DFT
reviews lately and using it heavily and its working well. Also, I had a need
to locate additional probe locations (vias) and the tool worked prefect
because it labels vias where the CAD tool does not label vias. An unlabeled
probe location(via) is an unusable location.
Anyway, I'm relying on the Factory 2000 tool for test DFT and test probe
manipulation and it is working well.
James N.
- Valere Power
-----------------------
Thanks for the ProntoVIEW-MARKUP software program. It is really good. How much does
it cost?
Leonid -
Israel
-----------------------
I think we
are pretty close to making a decision to buy. The software is very easy for
me to understand and it's functionality is exactly what
I need. I also get a good feeling about the level of support and expertise
that is available to help me if I need it.
Elias R. - TEchfabrik Inc.
-----------------------
It works great! Thank you
for your attention.
J. Valenin -
Hewlett Packard
-----------------------
The software is now in use on our shop floor, and is proving to be very useful indeed.
Just thought I'd let
you know that the feedback I am getting from the test and repair technicians
on our production floor is extremely positive, now that they are using the
VIEWER software every day....and wonder how they survived without it !
They find all the features really good and your software has dramatically
reduced the time taken to locate components and fix faults etc. The investment
has paid for itself already. We have not yet really used the annotation
features of the software but I'm hoping to get this off the ground in the near
future.
Keep up the good work.
Gerry I. - Benchmark
Electronics Europe
Update from Gerry:
I thought you might like to know that I just recently started using the annotation and embedded graphic features of the
ProntoVIEW-MARKUP software, and we are very impressed with it.
I look forward to hearing from you.
Regards and thanks,
Gerry I. - Benchmark
Electronics Europe
-----------------------
...ProntoVIEW-MARKUP is
a splendid product.
K.O. - Takaya Corp. (Japan)
-----------------------
Finally, I found
some time to use your software. It's a very good product. ...ProntoVIEW-MARKUP
is the best product we have found in our evaluation.
RD -
Celestica
-----------------------
Exactly what we have been looking
for.
Ed Christian - Texas
Instruments
-----------------------
I've been having a good look at
this software and I'm impressed with all the
different types of data it can import, not only with PADS and Mentor
Graphics, but also HPGL and DXF files that we also use. Also it can be
quite handy for the other formats such as Orcad and Allegro as we sometimes
get these files sent to us from other customers. It read in our board designs
without problems.
Very powerful aid tool.
S.V. - Kortex Europe
-----------------------
Lecroy went from 100% paper to 100%
paperless with CELLS Product & Job Tracking MES. We have tracked millions of transactions. Forced
routing flow eliminates assembly errors. CELLS Product & Job Tracking MES delivers the exact
current document from a controlled source to each step in the assembly
process. The production equipment, burn-in chambers, Test/Lab Windows,
etc. automatically log data to CELLS Product & Job Tracking MES. Part bins are
automatically restocked weekly via CELLS Product & Job Tracking MES, daily quality reports are
generated, process documentation, assembly documentation and more.
Michael Forrestor
Lecroy Corporation, New York
-----------------------
The online schematic feature in ProntoVIEW-MARKUP is super. We no longer need to have the schematic sheets on our desks. This is truly a great feature.
Jay Aglei - SSI Inc.
-----------------------
Several people in our company have looked at
the ProntoVIEW-MARKUP software, and we are definitely interested in buying it, it looks like it will do just what we need!
JS - European Electronics
-----------------------
I still can't stop thinking about
the extremely high number of practical applications this thing has in ALL assy
manufacturing plants. So many companies are out there trying to become
"World Class", and I keep thinking..."if they only had this
software". I know it's not just my Process/Industrial Engineering
background that makes me feel this way. From a control, continuous
improvement, and Operations Management standpoint...the CELLS Product & Job
Tracking MES software is
a hidden treasure.
John White - CEO
The Training Times
-----------------------
I had an, error free, board and
board_xy file within five minutes for our HP ATE... Thanks for the
excellent support really appreciated! This tool has definitely made a
difference for us.
Donald L Crawford
Turnkey Test, California
-----------------------
Excellent tool, we can design our
fixtures and programs extremely fast and accurately.
Stan Magel - Teleco
-----------------------
It's really hard to believe the amount of features packed into this software for the price. Throughout our evaluation process we were really trying to figure out what was missing but we couldn't find anything. As I mentioned earlier we will be placing the purchase order early next week for the full
ProntoVIEW-MARKUP package with all the CAD importers.
R.A. - CAE
-----------------------
We can identify test fixturing
problem very quickly and the visual board display is helpful for the program
debug process.
Luke Monoplie - TPG
-----------------------
I watched the video and the software is quite impressive.
D.H.
-----------------------
We have used the Unisoft software since 1993 and it works great! ProntoTEST-FIXTURE is a very good tool.
Just a
note to say I am using the free Unisoft PC Board VIEWER software extensively for a task
I am
working on. I think the difficulty of an alternate method would
greatly increase the time to completion.
In addition to our licensed copies of the Unisoft software we have over 50 users
of the Unisoft free VIEWER software at this Vermont plant. Unisoft has
come to bat quickly anytime we have needed support.
John Harrington - BF Goodrich Aerospace
-----------------------
Just to let you know the ProntoTEST-FIXTURE software found two DFT (Design
For Test) problems before the first artwork spin - great! The CAD guys corrected
them. After that I ran the board and board XY for the HP and it was perfect.
Surprising when something works start to finish the first time through!
Jerry H. -
Surface Tech
-----------------------
Price and performance, there is
nothing like UniSOFT ... I have reviewed others Test software but they just
didn't match up to the UniSOFT software...
C. Drew - Nexus
-----------------------
Just yesterday I installed the
Circuit Master ProntoTEST-FIXTURE software and it is an excellent Tool to develop Test
Fixtures.
R. Gomez - Delphi Automotive
-----------------------
The ProntoTEST-FIXTURE software is a splendid product.
K.
Ono - Takaya Corp. - Japan
-----------------------
I was first introduced to the
ProntoVIEW-MARKUP software several years ago by the Hewlett-Packard group in Puerto Rico. We use it every day here for practically every operation on the production floor.
RS - Hewlett-Packard, California
-----------------------
Being able to highlight a single or multiple traces and then to follow a signal or to find the potential location of shorted traces is a tremendous feature of the
ProntoVIEW-MARKUP software, we use it every day.
Frank Benton - Europe
